Repairs

Standard: €60 

Everything you need to have your guitar play as well as it possibly can. Includes fingerboard cleaning, fret polish, fingerboard conditioning, truss rod adjustment, action and nut height adjustment, intonation and hardware check. We also wipe down the guitar body, neck, and headstock.

Advanced: €75

This is for guitars that require a little more work to fine tune. Floyd Rose bridges, 8-string or 12-string guitars, 6-string basses. This includes shimming Floyd Rose saddles when needed to better match the radius.

Additional Charges for Set-ups

Non-accessible truss rods: + €10  (ie; having to remove the neck to adjust the truss rod)

Evertune bridges:             + €15

Kahler Bridges:                 + €15

If more than 3 nut slots require filling and/or cutting an additional charge of €10 will be applied and will cover the entire nut being adjusted.

Additional Services added on to Set-Ups

These are not recommended to be done without a set-up, so the prices here are add-ons.

Shim Neck: +€15 (We make custom tapered wooden shims to ensure your neck maintains proper contact with the body and wont cause any long term damage to the neck heel or pocket)

Blocking Bridge Trem: 

Single Block : + €30
Double Block: + €40

Tremol-no Install: + €15  (€25 if installed without a set-up)

New Nut (Prices do not include a set up)

From Blank: €70
Premade nut: €45
12-String nut: $120

Cut Nut Slots: €10 each (included with set-up)

Lower Locking Nut Shelf: +€25  (€10 with set-up)

Pickup Installs:

1 Pickup: €45
2 Pickups: €60
3 Pickups: €75

Additional Charges with Pickup Installs

Passive/Active Rewire: + €50 
Drill for Bridge Ground: + €15
Replace Jack: + €15

Replace Pots during a Pickup Installation: (does not include cost of parts)

Standard Pot: + €15  ($10 for each additional one)
Push/Pull (or push/push): + €25  (€15 for each additional one)

New Potentiomer Installs

Standard Pot: €30 (+$15 for each additional)
Push/Pull Pot: €35 (+ $20 for each additional)

Switches

Mini Switch: €25
Mini Switch (Advanced): €35 (this is for multipole mini switches used for polarity and phase switching)
3-Way Toggle or Blade: €35
5-Way Standard Switch: €40
5-Way Super Switch: €50
Arcade Button Killswitch: €50 (includes cost of resizing or drilling a new hole to fit the switch)

Resoldering or Replacing Jacks, Pots, Switches, Caps, etc: €20 (+$10 each if done with other work)

Sustainer system, Piezo system, or other custom electronic jobs:  These default to our hourly shop rate. Contact us for an estimate.

(A flat rate fee may apply if routing is required. Prices do not include the cost of parts)

File Fret Ends

Bolt-Ons: €45 ($20 with set-up)
Set/Thru: €50 ($25 with set-up)

Fret Level and Crown: €150 (Includes a full set-up)

Full Refret: Contact us for an estimate

Install Strap Buttons: €25 (€15 with other work)

Dowel and Re-drill Strap Buttons: €25 (€20 with other work)

Install Tuners: €25 (€15 with Set up) This is for drop-in replacement tuners

Install Tuners (advanced): Billed Hourly. This is when drilling, filling, resizing or refinishing is needed

Satin finish a neck: Lightly sanding down a painted neck to achieve a silky-smooth feel: €35

Installing strap buttons: Upgrade to straplocks, etc.: €20

Installing tuning machines: Upgrade to locking tuners, etc.: €35 

Hourly Flat Rate: €75 
Applies to non-standard requests and labor intensive work such as fingerboard scalloping, routing, neck sanding and neck shaping. If you don’t see a price listed here it will default to the hourly rate.

Minimum Bench Fee: €25 
This is only for work done, estimates are free.

Same Day Fee: + 50% of the main labor charge
This greatly depends on our current tech que, and our customers’ needs. Please call us to confirm that this is even a possibility before you come in.  A day or two advance notice makes it much more likely to be done.